Nuclear Safety Engineer
Apply NowCompany: SPECTRA TECH INC
Location: Piketon, OH 45661
Description:
Nuclear Safety Engineer III
Position Overview
Under direct supervision, Nuclear Safety Engineering job functions as assigned by management. Typical job responsibilities assist and support management in nuclear safety support of operations and engineering system design. The specific work assignment may include duties or activities that assist and support management in one or more of the following functional areas, in addition to other duties as assigned
Assists with tracking and trending of Nuclear Safety performance
Assists with maintenance/supports Nuclear Safety operability or engineering evaluations
Assists with the preparation of problem disposition reports
Prepares Unreviewed Safety Question (USQ) Screenings and Determinations
Performs reviews of Safety Basis documents
Assists in preparation of new and revised Safety Basis Documents
Performs basic project engineering functions involving monitoring of progress and preparation of procedures
Prepares documentation for communications and meetings
Identifies and evaluates project issues and problems
Provides assigned technical or functional support to team members
Performs a variety of tasks general/routine complexity in nature
Maintains knowledge of and demonstrates ability to perform work safely in accordance with all approved safety policies, procedures and applicable regulations and performs assigned duties in a safe manner
Actively participates in Safety Work Groups
Working Conditions:
Work in an environmental restoration atmosphere (outdated and/or abandoned facilities). Potential exposure to equipment movement hazards, dangerous chemicals/solvents or hazardous and radioactive materials if proper safety procedures are not followed.
Ability to wear respirator and other protective equipment to enter various types of potentially hazardous areas (such as but not limited to chemical, dust fumes, mists, heat stress factors, etc.).
Ability to carry several instruments/equipment or tools while walking extensively. Potential prolonged walking/standing, repeated pushing/pulling.
Ability to perform medium to very heavy work, exerting up to 100 pounds of force occasionally, non-repetitive, up to 50 pounds of force frequently (any exertion of force/lifting greater than 45 pounds requires usage of a two person "buddy system"), and/or more than 20 pounds of force constantly, repetitive; performing such activities as lifting, lowering, carrying, pushing, pulling, standing, walking, grasping, kneeling, stooping, reaching.
Potential for prolonged driving of or riding in a motor vehicle, machine operation, and/or working around moving equipment/machinery or motorized vehicles (such as but not limited to car, truck, golf cart, gator, heavy equipment).
Ability to work in confined areas, tanks, heat stress conditions, high noise and areas with radiation and chemical hazards.
Environmental conditions may include weather or temperature extremes, inclement weather (such as but not limited to wind, rain, excessive heat, excessive cold, snow/ice, etc.)
In some cases, radiological training may be required.
May be required to operate company vehicle during the course of work. All safety and DOT regulations and procedures must be adhered to at all times.
The statements above are intended to describe the general nature and level of work being performed by the person assigned to this position. Principal duties and responsibilities are intended to describe the overall purpose of this job.
This job description does not state or imply that the above are the only duties and responsibilities assigned to this position. Employees holding this position will be required to perform job-related duties as requested by management. All requirements are subject to modification to reasonably accommodate individuals with a disability.
Required Contingencies:
Pre-Employment Physical (office or field work)
Drug Screen
The ability to obtain/maintain "L" or "Q" Clearance one year from hire date
Background Check
Any site required training
Required Skills
Basic understanding of pertinent codes, governing regulations and industry practices
Basic knowledge of applicable codes and standards, as well as project procedures
Strong interpersonal and communication skills
Understanding of multiple engineering disciplines
Must possess a DOE "L" clearance or the ability to obtain a DOE "L" Clearance
Required Experience
Nuclear Safety Engineer II
Minimum Requirements
BS degree in a related field and 3 years of related experience, or an equivalent combination of education and experience is required. Typical experience ranges from 3 - 6 years.
Nuclear Safety Engineer III
Minimum Requirements
BS degree in a related field and 5 years of related experience, or an equivalent combination of education and experience is required. Typical experience ranges from 5 - 8 years.
Intermediate understanding of pertinent codes, governing regulations and industry practices
Intermediate knowledge of applicable codes and standards, as well as project procedures
Strong interpersonal and communication skills
Understanding of multiple engineering disciplines
Position Overview
Under direct supervision, Nuclear Safety Engineering job functions as assigned by management. Typical job responsibilities assist and support management in nuclear safety support of operations and engineering system design. The specific work assignment may include duties or activities that assist and support management in one or more of the following functional areas, in addition to other duties as assigned
Assists with tracking and trending of Nuclear Safety performance
Assists with maintenance/supports Nuclear Safety operability or engineering evaluations
Assists with the preparation of problem disposition reports
Prepares Unreviewed Safety Question (USQ) Screenings and Determinations
Performs reviews of Safety Basis documents
Assists in preparation of new and revised Safety Basis Documents
Performs basic project engineering functions involving monitoring of progress and preparation of procedures
Prepares documentation for communications and meetings
Identifies and evaluates project issues and problems
Provides assigned technical or functional support to team members
Performs a variety of tasks general/routine complexity in nature
Maintains knowledge of and demonstrates ability to perform work safely in accordance with all approved safety policies, procedures and applicable regulations and performs assigned duties in a safe manner
Actively participates in Safety Work Groups
Working Conditions:
Work in an environmental restoration atmosphere (outdated and/or abandoned facilities). Potential exposure to equipment movement hazards, dangerous chemicals/solvents or hazardous and radioactive materials if proper safety procedures are not followed.
Ability to wear respirator and other protective equipment to enter various types of potentially hazardous areas (such as but not limited to chemical, dust fumes, mists, heat stress factors, etc.).
Ability to carry several instruments/equipment or tools while walking extensively. Potential prolonged walking/standing, repeated pushing/pulling.
Ability to perform medium to very heavy work, exerting up to 100 pounds of force occasionally, non-repetitive, up to 50 pounds of force frequently (any exertion of force/lifting greater than 45 pounds requires usage of a two person "buddy system"), and/or more than 20 pounds of force constantly, repetitive; performing such activities as lifting, lowering, carrying, pushing, pulling, standing, walking, grasping, kneeling, stooping, reaching.
Potential for prolonged driving of or riding in a motor vehicle, machine operation, and/or working around moving equipment/machinery or motorized vehicles (such as but not limited to car, truck, golf cart, gator, heavy equipment).
Ability to work in confined areas, tanks, heat stress conditions, high noise and areas with radiation and chemical hazards.
Environmental conditions may include weather or temperature extremes, inclement weather (such as but not limited to wind, rain, excessive heat, excessive cold, snow/ice, etc.)
In some cases, radiological training may be required.
May be required to operate company vehicle during the course of work. All safety and DOT regulations and procedures must be adhered to at all times.
The statements above are intended to describe the general nature and level of work being performed by the person assigned to this position. Principal duties and responsibilities are intended to describe the overall purpose of this job.
This job description does not state or imply that the above are the only duties and responsibilities assigned to this position. Employees holding this position will be required to perform job-related duties as requested by management. All requirements are subject to modification to reasonably accommodate individuals with a disability.
Required Contingencies:
Pre-Employment Physical (office or field work)
Drug Screen
The ability to obtain/maintain "L" or "Q" Clearance one year from hire date
Background Check
Any site required training
Required Skills
Basic understanding of pertinent codes, governing regulations and industry practices
Basic knowledge of applicable codes and standards, as well as project procedures
Strong interpersonal and communication skills
Understanding of multiple engineering disciplines
Must possess a DOE "L" clearance or the ability to obtain a DOE "L" Clearance
Required Experience
Nuclear Safety Engineer II
Minimum Requirements
BS degree in a related field and 3 years of related experience, or an equivalent combination of education and experience is required. Typical experience ranges from 3 - 6 years.
Nuclear Safety Engineer III
Minimum Requirements
BS degree in a related field and 5 years of related experience, or an equivalent combination of education and experience is required. Typical experience ranges from 5 - 8 years.
Intermediate understanding of pertinent codes, governing regulations and industry practices
Intermediate knowledge of applicable codes and standards, as well as project procedures
Strong interpersonal and communication skills
Understanding of multiple engineering disciplines